Search...
You are here: Home / Cases & Application / Automotive / Cases & Applications / Auto Components Industry / Lidded Wire Mesh Cleaning Baskets: Will They Fit Your Machine And Keep Small Parts Inside?

MORE CATAGORY

Lidded Wire Mesh Cleaning Baskets: Will They Fit Your Machine And Keep Small Parts Inside?

Views: 15     Author: Lucian     Publish Time: 2026-10-16      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

AUKE / SMALL PARTS CLEANING

Lidded Wire Mesh Cleaning Baskets: Will They Fit Your Machine and Keep Small Parts Inside?

Small parts need a basket that fits the machine and keeps them contained as it turns. AUKE's lidded wire mesh baskets can be customized around your equipment, components and planned load.

AUKE lidded fine wire mesh cleaning basket with two front latches

Lidded Wire Mesh Baskets for Loose Small Parts

For small metal parts cleaned loose in a rotary machine, the lid closes the opening that an uncovered basket leaves exposed. As the basket turns, parts can move from the base toward the sides and cover. Keeping them inside depends on the mesh, the fit around the lid and the closure working together.

The AUKE basket shown combines woven wire mesh with a framed lid and two latches. The mesh provides openings for cleaning liquid to pass through, while the lid encloses the load. The basket is made from 304 stainless steel and is intended for loose-loaded components.

Built Around Your Machine's Basket Holder

A replacement basket needs to fit the machine's holder, not just pass through the loading opening. The lid and latches form part of that fit. A basket body may be the right size, yet a projecting latch can interfere with the holder or the mechanism that secures it.

AUKE can customize the overall dimensions, bottom supports, locating features and latch positions to match the equipment requirements. These details determine where the basket rests, how it locates in the holder and whether the machine's securing mechanism can engage as intended.

For an existing installation, the current basket drawing provides a useful starting point. Difficulties with loading, positioning or fastening can be discussed in the replacement design rather than simply copying the outside dimensions. Our guide to cleaning basket dimensions and machine clearance explains the distinction between the basket body and the complete assembly.

Keeping Small Parts Inside as the Basket Turns

A closed lid is only effective if the smallest parts cannot pass through the mesh or the gaps around it. During rotation, loose components can reach the sides and cover, so retention cannot depend on the basket floor alone.

The mesh and lid fit need to suit the same set of parts. A narrow pin, for example, may approach an opening end first. Its length is less relevant than the section that could pass through. Finer mesh will not prevent that component escaping through a larger gap between the cover and the rim.

Front view showing the two latches, lid edge and vertical supports of the AUKE fine mesh basket

The Whole Closed Edge Matters

The two latches fasten the cover to the basket. The fit along the sides and at the corners also needs to retain the intended components, including areas furthest from the latches. Part dimensions establish which openings are acceptable; the load and machine movement determine the conditions in which that fit must be maintained.

For a custom basket, a representative trial with the intended parts establishes whether they remain contained and the lid stays properly closed through the agreed cycle. This gives the mesh specification and lid fit a clear purpose: keeping your components inside during their actual cleaning process.

Underside of the AUKE fine mesh basket showing cross-bracing dividing the base into six sections

Underside view: cross-bracing supports the mesh within the bottom frame.

A Reinforced Base Beneath the Fine Mesh

The fine mesh holds the small parts; the framework beneath it provides support for the load. The base has cross-bracing that divides the mesh into six smaller sections, rather than leaving it to span the full basket floor without intermediate support.

The side panels also have vertical supports, while the lid has a perimeter frame and a central reinforcing member. These details provide support beyond the edges of the mesh panels.

The 260 × 210 × 110 mm basket has a stated static load range of 20–50 kg, with the applicable capacity confirmed for the configuration ordered. For rotary cleaning, the working load is agreed separately around the parts, basket configuration and machine's securing arrangement.

Basket Size Depends on More Than Batch Weight

Two batches with the same weight can take up very different amounts of space. Short, compact parts pack differently from long or irregular components. A batch may be within the agreed load limit yet leave too little room for the lid to close properly.

For loose-loaded parts, the lid closes the basket; it is not intended to force an overfilled batch into place. The usable space beneath the closed lid also needs to suit the way the parts are expected to move during cleaning.

AUKE can discuss custom wire basket dimensions and features within the machine's requirements. Considering part shape and batch quantity together helps establish a practical size, rather than selecting one by weight alone.

Frequently Asked Questions

Can this basket also be used for stationary or rocking cleaning cycles?

Yes. The lidded basket can be configured for stationary, rocking or rotary cleaning. The machine's basket holder and securing arrangement determine the equipment fit, while the parts determine the mesh and lid-clearance requirements.

Can one basket be used for different small parts?

Often, yes, provided each part type suits the selected mesh and loading arrangement. The smallest or narrowest features can determine the mesh choice, while bulkier parts can determine the space needed. A shared basket is best considered around the range of parts it will actually carry.

Does the lid prevent parts from scratching one another?

The lid keeps the load enclosed; it does not separate individual parts. This basket is intended for loose loading. For components with surfaces that must not touch, a separated or individually supported arrangement would be more appropriate.

Can AUKE make a replacement for an existing cleaning basket?

Yes. AUKE can customize the overall dimensions, bottom supports, locating features and latch positions around the existing equipment requirements. The replacement can also address details that are inconvenient in the current basket, rather than simply reproduce its outside dimensions.

Let's Discuss a Basket for Your Parts and Machine

Your existing basket is a useful starting point, whether you need a replacement or a better fit for a different batch of parts. A drawing or a few clear photos, together with the part size and usual batch weight, can help us understand what needs to stay the same and what could change.

AUKE can discuss the mesh, lid fit and equipment interfaces around your parts and cleaning process, with the proposed dimensions and loading requirements clearly defined.

Discuss Your Cleaning Basket

Email: linda@auke-bott.com

Customize Your Baskets

PRODUCT CATEGORY

QUICK LINKS

CONTACT INFO
Tel: + 86 182-6169-0816
WhatsApp: +86-182-6169-0816
Add: No. 15, Fengnan Road, Shuangfeng Town, Taicang, Jiangsu Province
Leave a Message
Contact us
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
                                                              Copyright © 2026 AUKE  All Rights Reserved.| Sitemap | Privacy Policy              www.suntoplaser.com