Parts scratched after washing? Your basket may be the problem
AUKE builds metal baskets around your parts, your cleaning machine and the way your operators handle them every day.
A lot of part damage happens after production
A part can leave the machining area in good condition and still arrive at the next process with scratches, dents or stains. The cause is often simple: the basket does not match the part.
Parts rub against each other in the cleaning basket. Water stays at the bottom. Operators shake the basket to drain it. A loaded basket bends after repeated use. Empty baskets take up too much workshop space.
If this is happening in your factory, the basket is worth reviewing before you change the washing process, add labor or accept more rework.
Problem 1: Parts hit each other inside the basket
Standard baskets often leave too much free space around each part. During washing, lifting or transport, the parts move and hit each other.
This is common with machined parts, automotive components, stamped metal parts, fasteners, tools and precision metal pieces.
A custom wire mesh basket can use dividers, positioning slots or shaped supports to keep parts in place. Less movement inside the basket usually means fewer scratches after cleaning.
Separate parts that should not touch each other
Hold irregular parts in a repeatable position
Reduce shaking during lifting and transfer
Protect high value parts during washing and storage
Problem 2: Cleaning liquid stays in the basket
Poor drainage slows the cleaning process. It can also leave liquid marks, residue or extra drying work.
Wire mesh baskets let liquid and hot air pass through the load. AUKE can adjust the mesh opening, basket depth and drainage direction based on your washing process.
Spray cleaning
Ultrasonic cleaning
Rinsing and drying
Degreasing processes
Stainless steel baskets for corrosive environments
Problem 3: The basket does not fit your washer, trolley or rack
Many factories buy a standard basket first, then ask workers to work around it. That creates small delays all day.
Common problems
Basket is too large for the washer
Basket holds fewer parts than needed
Workers transfer parts by hand
Basket does not fit the trolley or rack
Stacking feels unsafe
What AUKE checks
AUKE can make the basket size match your cleaning machine, trolley, dolly, storage rack or production line. The aim is to reduce extra handling and keep the workflow repeatable.
Problem 4: Baskets bend under heavy parts
Heavy parts need a stronger basket. If the frame bends, the basket may stop stacking properly or may no longer fit the cleaning machine.
AUKE can reinforce the frame, change the wire diameter, add support points and choose the right surface treatment for the working environment.
Problem 5: Empty baskets waste workshop space
Empty containers can become a storage problem by themselves. They block aisles, occupy racks and make return transport less efficient.
AUKE can design stackable, foldable or nestable metal baskets. Loaded baskets can use vertical space. Empty baskets can take less room during storage or return transport.
What AUKE needs before quoting
The fastest way to get a useful basket design is to send the working conditions first. A photo is often enough to start the discussion.
Part photo or drawing
Part size and weight
Quantity per basket
Cleaning machine inner size
Cleaning process
Load requirement
Stacking requirement
Material and surface treatment preference
Any anti-scratch or positioning requirement
Related AUKE products
FAQ
How can I stop parts from scratching during cleaning?
Use a custom wire mesh basket with dividers, slots or shaped supports. These structures reduce part movement during washing, lifting and transport.
Can AUKE make baskets for my cleaning machine?
Yes. AUKE can customize basket size and structure according to your cleaning machine, trolley, rack or production line.
Are wire mesh baskets suitable for drying after washing?
Yes. Wire mesh baskets allow liquid and hot air to pass through the load, which can help drainage and drying.
Can the basket be made stronger for heavy parts?
Yes. AUKE can reinforce the frame, adjust wire diameter and add support points for heavier industrial parts.
Get a basket made for your parts
If your current baskets cause scratches, slow drying, poor stacking or deformation, the basket is worth reviewing.
Send AUKE your part details and cleaning process. We will help design a custom wire mesh basket that fits your parts, your machine and your daily handling process.
